On Wed, 2011-11-02 at 15:37 +0100, LM wrote: > kron occurrence T10660 in 2:0 recurring > policy-list T10660 > ! > kron policy-list T10660 > cli show proc mem sort | redirect tftp://10.225.225.1/T10660-$t > > $t is not a variable as in the 'archive' command so I can have the > timestamp in every file generated at the tftp. > The kron job would avoid manual operation from a us to capture the info > required to detect a memory leak. > Does anyone none if $t or similar variable is supported somehow on IOS?
I've had better experience with using EEM instead of Kron. If you just need the filename to semi-unique you could use the uptime: ! Define an RMON event to react only when the CPU is busy rmon event 10 log description "1 minute avg. CPU > 90%" rmon event 11 log description "1 minute avg. CPU < 70%" rmon alarm 10 lsystem.57.0 5 absolute rising-threshold 90 10 falling-threshold 70 11 ! ! If using TACACS+ and command authentication you need to specify a username event manager session cli username "<tacacs-needs-a-username>" ! event manager applet EEM-copy-mem-usage event timer cron cron-entry "0 */2 * * *" action 1.0 info type routername action 1.1 info type snmp oid 1.3.6.1.2.1.1.3.0 get-type exact action 2.0 cli command "enable" action 2.1 cli command "show processes memory sorted | redirect tftp://192.0.2.10/$_info_routername-$_info_snmp_value-mem-usage.txt"; action 3.0 syslog msg "Memory usage copied to tftp://192.0.2.10/$_info_routername-$_info_snmp_value-mem-usage.txt"; ! (By the way: Your subject is waaay too long for comfort. Subjects should not contain information in themselves. :-)) -- Peter _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
