Hi i have a big problems,
On a Cisco 7204 VXR, i use this configuration: interface ATM2/0.1030 point-to-point mtu 1600 bandwidth 2048 no atm enable-ilmi-trap pvc MYLINKREF 1/1030 l2transport vbr-nrt 2048 2048 1 encapsulation aal5snap xconnect 192.168.10.100 1000 pw-class MplsLink i want tranfert this link on a Cisco 7301 with ios: Cisco IOS Software, 7301 Software (C7301-ADVENTERPRISEK9-M), Version 12.4(15)T1, RELEASE SOFTWARE (fc2) i create the same config but: " no atm enable-ilmi-trap" are not accepted and after put " pvc MYLINKREF 1/1030 l2transport" i don't have vbr-nrt, encapsulation and xconnect command anyone know this problems ? thanks for your help best regards olivier _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
