Of course, unless you are running a crypto lobotomized IOS image, you should be using ssh rather than telnet. Takes a little more work to set up to connect to the aux port, but protects you from eavesdroppers.
-- Vincent C. Jones Networking Unlimited, Inc. Phone: +1 201 568-7810 [email protected] On Thu, 2011-11-03 at 16:41 +0300, Gichu wrote: > On 3 November 2011 14:00, Pierre Emeriaud <[email protected]> wrote: > > > 2011/11/3 Gert Doering <[email protected]>: > > > So this sounds like "two sides spitting their login messages at each > > > other" - so make sure you don't have login enabled on the AUX ports. > > > > Maybe the routers were also spitting all the log messages on the > > console port, not only the login prompt. > > > > "no logging console" would be wise. > > > > Thats actually what I missed out. > Thanks Pierre, that was the missing link. > > Regards > Gichu > _______________________________________________ > cisco-nsp mailing list [email protected] > https://puck.nether.net/mailman/listinfo/cisco-nsp > archive at http://puck.nether.net/pipermail/cisco-nsp/ _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
