Hi,
On Fri, 11 Nov 2011, Ghassan.khalil wrote:
Dears,
I have an ASR functioning as a LNS, the LNS is configured as a PE router as
well.
I need to assign certain users to their proper VRF through the AAA server as it
should be applied on the virtual-access interface.
So what is the av-pair syntax required to accomplish this and the configuration
required from the ASR also.
I believe you would need something like:
cisco-avpair="lcp:interface-config=ip vrf forwarding VRFNAME"
google turns up this:
http://www.cisco.com/en/US/docs/routers/asr1000/configuration/guide/chassis/scaling.html
Greetings
Christian
Thanks,
Ghassan
_______________________________________________
cisco-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
--
Christian Kratzer CK Software GmbH
Email: [email protected] Wildberger Weg 24/2
Phone: +49 7032 893 997 - 0 D-71126 Gaeufelden
Fax: +49 7032 893 997 - 9 HRB 245288, Amtsgericht Stuttgart
Web: http://www.cksoft.de/ Geschaeftsfuehrer: Christian Kratzer
_______________________________________________
cisco-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
