On Wed, Nov 16, 2011 at 1:49 AM, Phil Mayers <p.may...@imperial.ac.uk> wrote: > On 11/16/2011 05:08 AM, Joseph Jackson wrote: >> >> Hey List, >> >> I'm wanting to apply a policy-map to rate limit a port that is a >> member of a vlan that is configured as a firewalled vlan. When I >> apply the service-policy input to the port directly connected to the >> server I get this message in the logs: >> >> >> %FM_EARL7-2-SWITCH_PORT_QOS_FLOWMASK_CONFLICT: QoS configuration on >> switch port FastEthernet1/5 conflicts for flowmask with feature >> configuration on SVI interface Vlan912 >> > > > Can you show the class & policy map you were trying to use, and the config > of both interfaces (before you started)?
Here ya go. class-map match-all limit-netcool-cdr match access-group 191 ! ! policy-map limit-netcool-cdr class limit-netcool-cdr police flow mask dest-only 2000000 62500 conform-action transmit exceed-action drop ! Directly connected interface - interface FastEthernet1/5 switchport switchport access vlan 101 no ip address speed 100 duplex full spanning-tree portfast end SVI - interface Vlan912 description ***OUTSIDE*** ip address 172.16.213.11 255.255.255.248 standby ip 172.16.213.13 standby timers 2 5 standby priority 200 standby preempt Thanks Phil! _______________________________________________ cisco-nsp mailing list cisco-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/