On Nov 18, 2011, at 11:10 AM, Ghassan.khalil wrote: > Dears, > I created some policy-maps with "police" command to limit the speed per > interface vlan. > I applied two service-policies on "interface vlan" each in different > direction: > > Interface vlan xx > Ip address 10.10.10.1 255.255.255.248 > service-policy in 1M-policy-IN > service-policy out 1M-policy-OUT > > the result is that only the outbound policy is working and the traffic is > being limited to the 1M speed which means I can only control the downlink > traffic of my customers. > I have another 7606 router in which I tested and the results were the same.
Do you have 'mls qos vlan-based' on the actual physical interfaces / trunk? -- Andrew Hoyos [email protected] _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
