ASA should be able to do OSPF (maybe dual static routes?) to support load balancing though I've only ever used OSPF on a pix and then only for ease of populating routing tables on the network and not for load balancing. To do load sharing this way I imagine you'd also have to disable state tracking in the ASA to allow for asynchronous routing... I have never really thought it all the way through before.
------Original Message------ From: Ryan West Sender: [email protected] To: Deric Kwok Cc: cisco-nsp Subject: Re: [c-nsp] Can ASA support 2 WAN connections? Sent: Nov 23, 2011 8:02 PM It can support failover. Look up ISP failover for an example. You can statically route other networks out the backup interface, but if you're looking for PBR, it's not on the ASA. Sent from handheld On Nov 23, 2011, at 8:55 PM, "Deric Kwok" <[email protected]> wrote: > Hi > > Can ASA support 2 WAN connections > > and do load sharing? > > Thank you > _______________________________________________ > cisco-nsp mailing list [email protected] > https://puck.nether.net/mailman/listinfo/cisco-nsp > archive at http://puck.nether.net/pipermail/cisco-nsp/ _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/ _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
