I've got a pair of ASA-5585s in an Active/Standby config running asa825-13-smp-k8.bin. A week or two after being deployed, the Active unit started to crash every few hours; TAC had me move to asa825-17-smp-k8.bin, and to also stop using remote-access IPSEC VPN on these units.
Now, 2 weeks later, the Active unit started to crash again, and TAC is baffled (when the secondary unit goes Active, it crashes too, so I don't think it is hardware) Does anybody have ASA5585s that run stable? Mine aren't doing anything crazy; pushing 120megabit/sec on the outside int with around 35000 connections, and about 275 static NAT translations for an e-com web farm; the exact same config was very stable on a pair of 5540s for years, until we "upgraded" to 5585s. Cisco Adaptive Security Appliance Software Version 8.2(5)17 Compiled on Fri 28-Oct-11 17:09 by builders Hardware: ASA5585-SSP-10 Crashinfo collected on 09:12:57.554 EST Mon Nov 28 2011 Traceback: 0: 0x8061c83 1: 0x8062797 2: 0x8af4cc5 3: 0xff6a86d5 4: 0xff57b1e0 5: 0x81dd98b 6: 0x81dc88a 7: 0x8af0a28 8: 0x8af9f62 9: 0x8afeb47 10: 0xff6a3a1c 11: 0xff61f7d7 -- deny ip any any (4393649193 matches) _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
