I am new to ASR 9000 family. We are migrating some of the border routers to ASR 9000. These have 2 RSP ( Route Switch Processor) one is active and other standby. it is in production, We have RSP synched and RSP1 is showing NSR ready (see below). Does the ASR RP swichover seamless, i.e the OSPF and BGP ( tcp) session get carried over to standby RP or will the neighbor relation get reset. The neigbor routers does not support Gracefull restart (GR).
RP/0/RSP0/CPU0:hostname# show redundancy Sat Dec 3 17:23:04.602 UTC Redundancy information for node 0/RSP0/CPU0: ========================================== Node 0/RSP0/CPU0 is in ACTIVE role Partner node (0/RSP1/CPU0) is in STANDBY role Standby node in 0/RSP1/CPU0 is ready Standby node in 0/RSP1/CPU0 is NSR-ready We dont have NSR turned on for routing protocols BGP and OSPF. I have 2 quesions will the turning on NSR under OSPF cause ospf neigbor relaionship to be reset and for BGP I think I need to reset the neighbor sessions to kick in. -Prash _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
