I think that was the one I was asking about.... unfortunately I already have it.... must be my config. Thanks.
Scott On Tue, Dec 6, 2011 at 9:17 AM, Ryan West <[email protected]> wrote: > On Tue, Dec 06, 2011 at 12:12:39, Scott Voll wrote: > > Subject: [c-nsp] VPN L2L connecting to SSL VPN user? > > > > I have a ASA at the hub and IPSEC VPN tunnels back to it from home > offices. > > I also use this ASA to head end all my road warrior anyconnect traffic. > > > > For some reason I can not place a call between the Home office and the > > road warrior. All ACL's look to be setup correctly. is there a > > command I might have missed to allow the IPSEC tunnels to communicate > with the SSL VPN users? > > > > Same-security-traffic permit intra-interface? > > -ryan > _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
