Make sure 'aaa authentication ssh console LOCAL' is set. Confirm your settings are ok via 'show ssh' Make sure you're connecting to the 'outside' address FROM the 'outside' (e.g. if you're on the inside, and trying to connect to the outside interface it will fail).
Regards, Josh. -----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of Antonio Querubin Sent: Friday, 9 December 2011 11:31 a.m. To: Rhino Lists Cc: [email protected] Subject: Re: [c-nsp] ASA 5505 SSH On Thu, 8 Dec 2011, Rhino Lists wrote: > I have a newly configured ASA 5505 that for some reason will NOT > authenticate a user via SSH? > > I have the following: > > ssh 0.0.0.0 0.0.0.0 outside > > aaa authentication ssh console LOCAL > > and I have a username and password defined. When I ssh it accepts the > connection and keeps reporting Access Denied? > > I have also tried it without the aaa authentication ssh console LOCAL > and tried using the username pix with the password specified in the > config but I get same results? Am I missing something? Did you create the crypto key? crypto key generate rsa general-keys -- Antonio Querubin e-mail: [email protected] xmpp: [email protected] _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/ _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
