On 10/12/2011 02:38, David Hubbard wrote: > I was curious if anyone knows if it's possible to > implement DAI (and its prerequisite dhcp snooping) > in a UCS/vmware environment?
I think you'll need to run the N1k virtual switch in order to implement that: > http://www.cisco.com/en/US/docs/switches/datacenter/nexus1000/sw/4_2_1_s_v_1_4/security/configuration/guide/n1000v_security_13arpinspect.html#wp1329463 If I were you, I would think very hard before implementing N1K in your VM environment. Although it has lots of nice bells and whistles and makes a pleasant change from the feature-free vmware switching environment, it is a cow to maintain. Check out the 45 page upgrade guide for NXOS 4.2: > http://www.cisco.com/en/US/docs/switches/datacenter/nexus1000/sw/4_2_1_s_v_1_4/upgrade/software/guide/n1000v_upgrade_software.html In fact, it looks like it's been simplified by scripting chunks of the compatibility matrices that they used to supply with previous version. Nick _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
