Hi,
On Tue, 13 Dec 2011, Lee Starnes wrote:
Hi,
I have an odd question. We have a Cisco WS-C2950T-24 that was working fine
until we changed the device it is directly connected to for its uplink. The
switch was connected to a gig port on a 3550 and was reachable. It is now
connected to a gig port on a 6509. The strange thing is, it passes traffic
to all the devices conencted to it and even to another 3550 connected via a
gig port. We just can't seem to ping or connect to the switch itself.
Management VLAN is 32. The fact that it works on the the 3550 which has to
pass through the 2950, tells me that the VLAN is trunking through. A show
vlan on the 2950 shows it active and a show int vlan 32 on the 2950 shows
it up/up. Below is how these are configured and connected. Anyone ever seen
this before?
you might see more details on what is going on from comparing the outputs of
show interface GiX/Y switchport
on all affected switchports.
Also do a
show interface Vlan32
on the affected 2950 to see if the management interface is up.
Greetings
Christian
--
Christian Kratzer CK Software GmbH
Email: [email protected] Wildberger Weg 24/2
Phone: +49 7032 893 997 - 0 D-71126 Gaeufelden
Fax: +49 7032 893 997 - 9 HRB 245288, Amtsgericht Stuttgart
Web: http://www.cksoft.de/ Geschaeftsfuehrer: Christian Kratzer
_______________________________________________
cisco-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
