Tried all of these things kind of lost on this one. Waiting to hear back from HP.
-----Original Message----- From: Håvard Staub Nyhus [mailto:[email protected]] Sent: Tuesday, 13 December 2011 11:16 PM To: Thomason, Simon Cc: [email protected] Subject: Re: [c-nsp] Cisco 5k with HP flex Fabric > Has anyone run into issues with adding new vlans to a VPC for HP blades? I > have just provisioned a new network to pump down to my HP blades but have run > into issues on the HP farm. HP Flexfabric certainly feels like a black hole in the data center network infrastructure. Are you sure the vlan is correctly provisioned on the HP blades? It is certainly easy enough to misconfigure the flexfabric with regards to failover. What kind of channel protocol are you running? LACP? what does "show port-channel summary" say? Is everything connected properly? Try turning on LLDP on your Nexus and verify your connections... -- Håvard Staub Nyhus Network Consultant +47 41 88 00 99 Stuck for gift ideas? Check out racq.com/shop where you are sure to find something for everyone. Please Note: If you are not the intended recipient, please delete this email as its use is prohibited. RACQ does not warrant or represent that this email is free from viruses or defects. If you do not wish to receive any further commercial electronic messages from RACQ please e-mail [email protected] or contact RACQ on 13 19 05. Please Note: If you are not the intended recipient, please delete this email as its use is prohibited. RACQ does not warrant or represent that this email is free from viruses or defects. If you do not wish to receive any further commercial electronic messages from RACQ please e-mail [email protected] or contact RACQ on 13 19 05. _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
