Hi, ok, nevertheless, what can I expect from these 4 processors / plattforms ? As far as I found NPE-G1 / NPE-G2 will have SW updates till 2013/2015.
What throughput can bigger/newer plattform like Sup32/ASR provide with netflow ? kind regards Rolf > Hi, > > On Fri, Dec 16, 2011 at 03:37:59PM +0100, "Rolf Hanßen" wrote: >> What about a NSE-100 ? Looks cheap on Ebay. > > There's a reason for that. End-of-life, and abandoned architecture (PXF). > > gert > > > -- > USENET is *not* the non-clickable part of WWW! > //www.muc.de/~gert/ > Gert Doering - Munich, Germany > [email protected] > fax: +49-89-35655025 > [email protected] > On 16.12.2011 15:37, "Rolf Hanßen" wrote: > Hello, > > 2nd hand is no problem, I did not think about new stuff at all. > > What about a NSE-100 ? Looks cheap on Ebay. > Docs say "3.5 Mpps (PXF); 450 kpps (RP)". Is IPv6 forwarded in hardware or > via RP on NSE ? > > Concerning Netflow on NSE-100/NSE-150/NPE-G1/NPE-G2 cards: > What traffic amount is realistic ? Is the limitation factor bandwidth or > pps ? > What happens beyond the point it can handle to send the Netflow data > properly ? Does that affect Netflow only (for example it sends incomplete > data or switches to a sampling mode to reduce load) or will packet > forwarding also be affected ? > > Im just looking for high pps capability for flooding scenarios only. > If just accounting loses some data in such cases it is not a big issue. > > Anything else to take care of ? > > Concerning other/software based solutions: > I prefer some box that can exchange the existing one without much time > effort for testing/preparing/configuring. > > regards > Rolf _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
