On 27/12/2011, at 8:08 AM, Roy wrote: > I use RANCID ton a number of routers. About five days ago, it started > failing on three routers. If I manually connect to these routers, it seems > to work for a minute or so and then the telnet session gets disconnected. > The disconnect only occurs during a data transfer such as "show conf"
If it only dies on large command outputs, its an MTU problem. _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
