Well, If you carefully read FC-BB-5 ver. 1.03, you may see that each Enode should be connected to Fibre Channel Forwarder. That is what I mean. Only FIP version 1 should remove this limitation.
On Wed, Dec 28, 2011 at 3:03 PM, Asbjorn Hojmark - Lists <li...@hojmark.org>wrote: > > Do you know what the limit to vlans on flexfabric is? > > It depends on the software version, which may be why you see different > values different places. > > The maximum in a FlexFabric module is 320 VLANs with VC 3.18. There > are other limits as to the number of VLANs in the VC domain, but that > is an "it depends" value, based on the design. > > -A > > _______________________________________________ > cisco-nsp mailing list cisco-nsp@puck.nether.net > https://puck.nether.net/mailman/listinfo/cisco-nsp > archive at http://puck.nether.net/pipermail/cisco-nsp/ > _______________________________________________ cisco-nsp mailing list cisco-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/