On Wednesday, January 04, 2012 04:42:02 AM Leonardo Gama Souza wrote: > I have a dumb question. > > Is the 3560/3750 platform able to load-balance MPLS > packets based on src-dst IP on an Etherchannel?
Not according to this:
lab#sh etherchannel load-balance
EtherChannel Load-Balancing Configuration:
src-mac
EtherChannel Load-Balancing Addresses Used Per-Protocol:
Non-IP: Source MAC address
IPv4: Source MAC address
IPv6: Source MAC address
lab#
lab#conf t
Enter configuration commands, one per line. End with CNTL/Z.
lab(config)#port-channel load-balance ?
dst-ip Dst IP Addr
dst-mac Dst Mac Addr
src-dst-ip Src XOR Dst IP Addr
src-dst-mac Src XOR Dst Mac Addr
src-ip Src IP Addr
src-mac Src Mac Addr
lab(config)#
The above is a 3560G.
The ME3750 does support MPLS, but not when doing 802.1AX
for hashing.
We have 6500's that hash on MPLS labels for 802.1AX.
Cheers,
Mark.
signature.asc
Description: This is a digitally signed message part.
_______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
