On Fri, Dec 16, 2011 at 01:25, "Rolf Hanßen" <[email protected]> wrote: > Hello, > > I am looking for a stable, reliable router / Layer3 switch that can do the > following: > -forward at least 1GBit / 1Mpps > -full support of IPv6 > -provide NetFlow data or similar for several hundred connected hosts in a > way that can be used for IP-based accounting (including IPv6 and not > sampled) > -small size (max. 5HU) > -redundant PSU > > nice to have: > -bgp > -hsrp/vrrp > > not needed: > -full table > -SFP or 10G Interfaces > -high amount of interfaces (3x 1000T is ok) > > At the moment there is a GSR 12008 used for it but it has no IPv6 support > (apart from senseless size and power wasting). > I got a suggestion to take a refurbished 7206VXR + NPE-G1 but it still > looks expensive to me for such old piece of hardware. > Can you suggest a better/cheaper solution ?
if you want something else than cisco, you may want to take a look at brocade cer2000 routers/switches. 1U, has support for 10GE interfaces. list price for a 24 port GE model starts at around $12-14k and it's very cheap compared to either cisco or juniper in this regard. _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
