Hi,
On Mon, 9 Jan 2012, Pawlowski, Maciej wrote:
Hi,
We are going to set-up ASR1001 router for terminating PPP sessions from CPE
devices via L2TP.
We must provide per-host IP reservation for each CPE (CPE might be
preconfigured first). For some reasons ($:) ) we are looking for using DHCPd
instead of CSACS.
why do you need dhcp just to get rid of Cisco Secure Access Control Server ?
Why not just use a different radius server for ppp aaa and be done with it.
FreeRadius or Radiator would both do the job. And PPP with IPCP just sounds a
lot more natural for L2TP than DHCP does.
Greetings
Christian
1. Does IOS-XE support relay of IPCP (or DHCP) requests from PPP clients to
DHCP server ?
2. Which parameters are forwarded to DHCP server - the point is how DHCPd can
identify particular CPE ?
I don't have a lot of experience on this topic, so the help is appreciated.
What about using FreeRadius for this ?
Cheers,
Maciek
_______________________________________________
cisco-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
--
Christian Kratzer CK Software GmbH
Email: [email protected] Wildberger Weg 24/2
Phone: +49 7032 893 997 - 0 D-71126 Gaeufelden
Fax: +49 7032 893 997 - 9 HRB 245288, Amtsgericht Stuttgart
Web: http://www.cksoft.de/ Geschaeftsfuehrer: Christian Kratzer
_______________________________________________
cisco-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
