Thanks again Mark!
> > So the 1004 supports ESP10 or 20 (So up to 20Gb), but > > also supports the SIP40(40Gb) - The 1004 can only do up > > to 20Gb though correct? So what does the SIP40 > > provide?(40Gb aggregate bandwidth per "slot"...but the > > ESP20 only can do 20Gb?) > > There is an ESP40 as well. The product page for the 1004 states it only supports the ESP20 though?(Unless this is not up to date info) http://www.cisco.com/en/US/products/ps9343/prod_models_comparison.html > > > So does this > > mean that the 1004 (With 8 SPA slots), would have an > > additional 4 SPA slots? > > Not quite. Each SIP provides 4x SPA slots. These 4x SPA > slots can swallow 4x single-heights SPA's or 2x dual-height > SPA's. > > The number of supported SPA slots per SIP is generally based > on single-height SPA's. > > For the ASR1004, only 2x SIP's are supported, meaning you > can have up to 8x single-height SPA's in that chassis. Ah - Ok, so the SIPs dont actually (physically) take any SPAs, and to utilize all SPA slots(8 on the 1004) you need 2 x SIP's installed? The install guide seems to indicate that they have SPA slots? http://www.cisco.com/en/US/docs/interfaces_modules/shared_port_adapters/install_upgrade/ASR1000/ASRmov.html _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
