Software client but I was thinking if the client could send information about itself (dot1x) part then this might work. Sorry if I have miss understood dot1x but thought that the same kind of functionality could be use such as for wireless with the vpn client.
Just trying to find out what can be done right now. -----Original Message----- From: Christopher J. Pilkington [mailto:[email protected]] Sent: Monday, 30 January 2012 3:16 PM To: Thomason, Simon Cc: [email protected] Subject: Re: [c-nsp] Cisco ASA and ipads On Jan 29, 2012, at 22:28, "Thomason, Simon" <[email protected]> wrote: > Just did a quick search to see if the ASA would support Dot1x and does not > look like they do as this might have been a different option. Perhaps I'm misunderstanding your topology here... are these laptops entering your network with a software VPN client, or do you have a router at their site terminating the VPN tunnel? If the former, I don't see how 802.1x fits. -cjp Renew your membership online, simply visit http://www.racq.com.au/my_racq/make_a_payment today. Please Note: If you are not the intended recipient, please delete this email as its use is prohibited. RACQ does not warrant or represent that this email is free from viruses or defects. If you do not wish to receive any further commercial electronic messages from RACQ please e-mail [email protected] or contact RACQ on 13 19 05. Please Note: If you are not the intended recipient, please delete this email as its use is prohibited. RACQ does not warrant or represent that this email is free from viruses or defects. If you do not wish to receive any further commercial electronic messages from RACQ please e-mail [email protected] or contact RACQ on 13 19 05. _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
