Here's how to do it (asr1004): conf t platform shell end
request platform software system shell rp active Then you have Linux :) Regards, Antonio Soares, CCIE #18473 (R&S/SP) [email protected] http://www.ccie18473.net -----Original Message----- From: Christian Kratzer [mailto:[email protected]] Sent: quarta-feira, 1 de Fevereiro de 2012 14:08 To: Antonio Soares Cc: [email protected]; [email protected] Subject: RE: [c-nsp] ASR1000 - Software Redundancy Hi, On Wed, 1 Feb 2012, Antonio Soares wrote: > Can you open a shell and do a top so we can see the memory consumption ? if you tell me how to ? Greetings Christian > > > Regards, > > Antonio Soares, CCIE #18473 (R&S/SP) > [email protected] > http://www.ccie18473.net > > > > -----Original Message----- > From: Christian Kratzer [mailto:[email protected]] > Sent: quarta-feira, 1 de Fevereiro de 2012 13:29 > To: Antonio Soares > Cc: [email protected]; [email protected] > Subject: Re: [c-nsp] ASR1000 - Software Redundancy > > Hi, > > On Wed, 1 Feb 2012, Antonio Soares wrote: > >> Yes, lesson learned, no software redundancy at least with the RP1 which >> memory maximum is 4GB which means 700MB usable... >> >> In the meanwhile, I saw that it's possible to switch to the underlying OS >> and we can do linux commands like top: >> >> top - 03:50:16 up 12:22, 0 users, load average: 0.21, 0.13, 0.09 >> Tasks: 136 total, 2 running, 134 sleeping, 0 stopped, 0 zombie >> Cpu(s): 1.0%us, 2.6%sy, 0.0%ni, 96.0%id, 0.0%wa, 0.3%hi, 0.0%si, >> 0.0%st >> Mem: 3874968k total, 1707248k used, 2167720k free, 127152k buffers >> Swap: 0k total, 0k used, 0k free, 1075788k cached >> >> PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND >> >> 25147 root 20 0 26784 14m 12m S 1.3 0.4 6:40.53 imand >> >> 23063 root 20 0 28008 10m 8136 S 1.0 0.3 4:51.46 cmand >> >> 25922 root 20 0 1916m 403m 142m R 0.7 10.7 9:42.53 > linux_iosd-imag >> (...) >> >> We see lots of free memory so I suspect we can change the default values >> that IOSd is able to allocate. > > if you search the archives there have been several threads on asr1k memory > usage: > > following posting claims that the memory allocated to ios is currently not > configurable: > > https://puck.nether.net/pipermail/cisco-nsp/2011-August/080691.html > > All this still does not explain following on a pair of asr1001 boxes > > cisco ASR1001 (1RU) processor with 1207124K/6147K bytes of memory. > 9 Gigabit Ethernet interfaces > 32768K bytes of non-volatile configuration memory. > 4194304K bytes of physical memory. > 7782399K bytes of eUSB flash at bootflash:. > > this is explicitly without any software redundancy and the IOS still only > sees 1G of the potential 2G it should bee seeing. > > Greetings > Christian > > -- Christian Kratzer CK Software GmbH Email: [email protected] Wildberger Weg 24/2 Phone: +49 7032 893 997 - 0 D-71126 Gaeufelden Fax: +49 7032 893 997 - 9 HRB 245288, Amtsgericht Stuttgart Web: http://www.cksoft.de/ Geschaeftsfuehrer: Christian Kratzer _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
