You have to unlearn those old-style C4K configurations and use MQC. (QoS cannot be turned off, so the qos command is not needed. Show qos makes no sense with MQC, where you do 'sh policy-map')
You have to look under Sup6 (and 4948E!) in the config guide: http://www.cisco.com/en/US/docs/switches/lan/catalyst4500/12.2/15.02SG/configuration/guide/qos.html#wp1474085 -A Sent from my tablet; excuse brevity On 02/02/2012, at 15.23, Mack McBride <[email protected]> wrote: > Except the global configuration commands are such as 'qos' are not available. > 'show qos' is also not available :( > > Mack > > -----Original Message----- > From: Asbjorn Hojmark [mailto:[email protected]] > Sent: Thursday, February 02, 2012 8:16 AM > To: Mack McBride > Cc: [email protected] > Subject: Re: [c-nsp] QOS for 4948E - 15.0(2)SG3 code > > The 4948E is basically a fixed-configuration Catalyst 4500 with a Supervisor > 6 in a small box, so you can use the 4500 configuration guide. > > -A > > Sent from my tablet; excuse brevity > > On 01/02/2012, at 16.04, Mack McBride <[email protected]> wrote: > >> Does anyone have documentation on QOS for the 4948E running 15.0(2)SG3 code? >> It is significantly different from 12.2(54)SG3. >> Cisco does not yet have a configuration guide on-line or at least not >> under the 4900 switches :( >> >> LR Mack McBride >> Network Architect >> _______________________________________________ >> cisco-nsp mailing list [email protected] >> https://puck.nether.net/mailman/listinfo/cisco-nsp >> archive at http://puck.nether.net/pipermail/cisco-nsp/ _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
