You might also want to define what conditions prompt a failover and
maybe tie some SLAs to that. IP SLAs that is.
-Hammer-
"I was a normal American nerd"
-Jack Herer
On 2/13/2012 8:04 AM, Tony Tauber wrote:
You really should check the output of show commands (e.g. "show bgp
neighbor a.b.c.d routes", etc.) both on your side and on the side of your
ISPs to ensure everyone is accepting, installing, and redistributing the
routes. Then go from there.
Tony
On Mon, Feb 13, 2012 at 4:53 AM, alex nyagah<[email protected]>wrote:
Hi Group,
I have the following configs in my router but auto failover between two ISP
is not working, can someone please help..
_______________________________________________
cisco-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
_______________________________________________
cisco-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
