Any reason you are not going to 6.0(3) code ? It was released at about same time and the release notes actually were published earlier ?
I am in the same boat - thought I would move to 6. now to make future upgrades a little easier. thank you, > Message: 1 > Date: Mon, 13 Feb 2012 16:58:49 -0000 > From: "Antonio Soares" <[email protected]> > To: <[email protected]> > Subject: [c-nsp] Nexus 7010 5.1 to 5.2 upgrade > Message-ID: <00b101ccea70$c23f5930$46be0b90$@pt> > Content-Type: text/plain; charset="iso-8859-1" > > Hello group, > > In order to support the new 2232PP FETs, I will need to upgrade a pair of > 7010 running 5.1.3. > > I'm reading the 5.2 release notes and the only important issue I see is the > OTV configuration that needs to be changed. The OTV Site Identifier is now > mandatory. I also found that is now mandatory to configure the default CoPP > policy: > > ********** > Apply the default CoPP policy. > > Example: > switch(config)# copp profile strict > > Upgrade to Cisco NX-OS 5.2(1) and later requires configuring the default > CoPP policy. > ********** > > I have a pair of 7010 but just one is configured for OTV and also I only > have one RP in each box so I don't have ISSU support. > > I'm looking for any caveats and limitations that you may have experienced. > I > will upgrade to the recommended release 5.2.3a. > > > > Thanks. > > Regards, > > Antonio Soares, CCIE #18473 (R&S/SP) > [email protected] > http://www.ccie18473.net > > > _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
