Hey guys, I have an ASR1006 connected to a Nexus 7k via a port-channel. Apparently you can't apply a service-policy based on NBAR to a port-channel interface (on the ASR). My question is, can you apply the service-policy to the physical interfaces that make up the port-channel?
Or should I consider marking the traffic on the Nexus? At which point I'm not sure if I would run into the same issue trying to apply it to the port-channel interface. I'd lab it up if I could but I can't right now. TIA _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
