Howdy, I had a software forced reload on a switch (on this particular switch it was the first time.)
It left a crashinfo, which is unusual in my experience so it may actually be a software issue. The switch is running SXI3 and this is the beginning of the crash dump, I tried to use the bugchecker on cisco.com to figure out if maybe this is just a bug in SXI3 but wondered if anyone is good at decoding these messes? Feb 20 12:48:06 EST: %C6K_PLATFORM-2-PEER_RESET: RP is being reset by the SP %Software-forced reload 12:48:06 EST Mon Feb 20 2012: Breakpoint exception, CPU signal 23, PC = 0x424A5D18 -------------------------------------------------------------------- Possible software fault. Upon reccurence, please collect crashinfo, "show tech" and contact Cisco Technical Support. -------------------------------------------------------------------- -Traceback= 424A5D18 424A386C 41D08558 41D09BDC 42089F9C 4208A0F4 42498EFC $0 : 00000000, AT : 43C00000, v0 : 45480000, v1 : 00000000 a0 : 46F3CE28, a1 : 00008100, a2 : 00000000, a3 : 00000000 t0 : 42498FE8, t1 : 34008101, t2 : 42499010, t3 : FFFF00FF t4 : 42498FE8, t5 : 500122E8, t6 : 00000000, t7 : 5C651E4D s0 : 00000000, s1 : 43B10000, s2 : 00000000, s3 : 43A80000 s4 : 43A80000, s5 : 43A80000, s6 : 43360000, s7 : 00000001 t8 : 5001234C, t9 : 00000000, k0 : 00000000, k1 : 00000000 gp : 43C050B4, sp : 50012418, s8 : 43350000, ra : 424A386C EPC : 424A5D18, ErrorEPC : BFC00000, SREG : 34008103 MDLO : 00000000, MDHI : 00000000, BadVaddr : 00000000 DATA_START : 0x436B77F0 Cause 00000C24 (Code 0x9): Breakpoint exception Anyway, good old 375 seconds of pain =) Anyone have any thoughts? Thanks, -Drew _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
