I know this "feature" exists in 12.2(33)SXI4, but I believe it was more accurately classified as a bug and I *thought* it was fixed in a later release. I'd also like to hear if this is actually an intended change or just a regression. If intended, I'd like to know how to prevent this behavior as I don't want to trigger soft updates until I've finished modifying a route-map. It's very CPU intensive with a full table.
-Vinny -----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of Joe Maimon Sent: Tuesday, February 21, 2012 10:08 AM To: cisco-nsp Subject: [c-nsp] automatic bgp route refresh Hey All, I would greatly appreciate it if somebody would point me to the release notes for the change I see in 15.1 where BGP neighbor route-map configurations happen in real time, without needing any clearing, soft or otherwise. Much obliged. Best, Joe _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/ _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
