On Mon, Feb 20, 2012 at 6:29 AM, ar <[email protected]> wrote: > I have 7200 acting as LNS. > I have multiple QOS for the subscribers via Radius. > One GE interface of the 7200 LNS is facing to LAC. > > I am trying to attach a QOS/shaper policy on this GE interface.
and so that I understand -- is the intent here to ensure the total transmitted packets in l2tp towards the lac does not exceed a given total less than the gige port? if yes, then also note 'qos pre-classify' may be required on the virtual-templates, as this shaper would not normally see "inside" of the l2tp ip packet. presumably, if you're shaping your aggregate tx'd bits towards the lac(s), you'd want to do some amount of fair-queue or flow based wred, not simply fifo it arbitrarily deeply in the policy map... -tk _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
