Hi Phil, Yep I had missed the mls qos vlan-based command on the port. Looks to be working now.
Thanks, -Lee On Wed, Feb 22, 2012 at 1:14 AM, Phil Mayers <[email protected]>wrote: > On 02/21/2012 09:02 PM, Lee Starnes wrote: > >> Hi Everyone, >> >> I did a few searches of the archives and was not able to find an answer to >> what I'm trying to do. What we are trying to do is put a rate limit on >> certain TCP ports for traffic on customer VLANs. I have put into place a >> policy map that does not seem to be working. We are limiting both >> directions. Below is what I have. Does anyone have any ideas why this >> would >> not work? Is there a different way of handling this? >> > > Do you have all the usual bits you need, including: > > mls qos > int GiX/Y > switchport ... vlan 555 > ! set vlan-based on physical port > mls qos vlan-based > > What does "sh mls qos ip" say? > _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
