> Hi > > unusual situation but we need to connect to a new carrier service at 100M and > we only have SPA-2XG1E in a SIP-400 7613 chassis. Can you force these to run > a 100M with copper SFP? As below: > > Router#sh run int gi 10/3/0 > Building configuration... > > Current configuration : 173 bytes > ! > interface GigabitEthernet10/3/0 > description Telstra BDAS Standard POI > no ip address > speed 100 > no negotiation auto > no snmp trap link-status > end
_______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
