On Monday, February 27, 2012 12:14:15 PM Xu Hu wrote: > Yes, i am referring the ospf hello-interval. > In the 7609 IOS configuration, under the interface, we > had the ospf configuration as bellow: > > "ip ospf dead-interval minimal hello-multiplier 3" > if we configure this command, the ospf hello interval > will be 333 msec. > > "Timer intervals configured, Hello 333 msec, Dead 1, Wait > 1, Retransmit 5"
So what you're talking about is the "OSPF Support for Fast Hellos" feature from Cisco: http://www.cisco.com/en/US/docs/ios/12_0s/feature/guide/fasthelo.html This feature combines the Hello Interval and Dead Interval, along with some enhancements that make it behave like BFD in a way. AFAICT, it's only supported in IOS (and perhaps, IOS XE). You can tweak both the Hello and Dead Interval timers in IOS XR, but they lack of the enhancements to enable fast detection. For IOS XR, yes, BFD is your best bet. Mark.
signature.asc
Description: This is a digitally signed message part.
_______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
