I am trying to trunk private vlans from a Cisco 6509 to some other switches. There does not appear to be a way to do this but it works great on a Cisco 4948. Does the 6509 not support doing this or is there something else needed to make this work?
Here is some sample config. ############ Cisco 4948 ############ vlan 850 private-vlan isolated vlan 851 private-vlan primary private-vlan association 850 interface GigabitEthernet1/34 switchport trunk encapsulation dot1q switchport trunk allowed vlan 850,900,910,911 switchport private-vlan trunk allowed vlan 850,900,910,911 switchport private-vlan association trunk 851 850 switchport private-vlan association trunk 901 900 switchport private-vlan association trunk 909 910 switchport private-vlan association trunk 912 911 switchport private-vlan association trunk 853 852 switchport mode private-vlan trunk interface Vlan851 ip address x.x.x.1 255.255.255.0 private-vlan mapping 850 ############ Cisco 6509 Sup720-3BXL WS-X6748-GE-TX or WS-X6548-GE-TX IOS Version 12.2(33)SXI6 Advanced Enterprise ############ vlan 850 private-vlan isolated vlan 851 private-vlan primary private-vlan association 850 interface GigabitEthernet1/1 switchport trunk encapsulation dot1q (everything after this point errors out because "trunk" is not an option for any of these) switchport private-vlan trunk allowed vlan 850,900,910,911 switchport private-vlan association trunk 851 850 switchport private-vlan association trunk 901 900 switchport private-vlan association trunk 909 910 switchport private-vlan association trunk 912 911 switchport private-vlan association trunk 853 852 switchport mode private-vlan trunk _______________________________________________ cisco-nsp mailing list cisco-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/