Hi Richard, Following vlan mapping syntax is not supported. -Waris
-----Original Message----- From: Richard Hartmann [mailto:[email protected]] Sent: Friday, March 23, 2012 8:51 AM To: Waris Sagheer (waris) Cc: [email protected] Subject: Re: [c-nsp] Why does the ME3600X not support VLAN mapping? Hi Waris, > ME3600X does support VLAN mapping through EVC. > Can you elaborate the requirement? Indeed, it does; I found that out in the meantime; I just realized that several replies, and thus the resulting conversation, was off-list. No idea why, but as it wasn't me who took it off-list in the first place, I will refrain from bouncing the mails to this list. Is the syntax of switchport vlan mapping enable switchport vlan mapping 123 654 deprecated? It's a lot simpler and cleaner than EVC if you need to remap VLANs, only. Thanks for getting back to me in what, to this list, must have looked like a stale thread, Richard _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
