I have two 7604 routers setup in a lab. I have been using them to test different services before we implement them in our live network. I have built many xconnects with them before and never had any issues, until a couple days ago I built a xconnect from router 1 to router 2 that would not come up. When I ran a "sh mpls l2 vc" I did not see the new vc on R1 but did on R2 . After verifying configs I decided to reboot R1. When It came back the "sh mpls l2 vc " command returned nothing. Even though I have 5 different xconnect defined on the router. R2 still shows all the vc's with a status of down. When I run a "debug mpls l2 vc event" I keep getting the error "Failed to export VC data". I have done some searching and cannot find what this means. Any help will be greatly appreciated. Thanks
Router1 R1#sh mpls l2 vc Local intf Local circuit Dest address VC ID Status ------------- -------------------------- --------------- ---------- ---------- R1# Router2 R2#sh mpls l2 vc Local intf Local circuit Dest address VC ID Status ------------- -------------------------- --------------- ---------- ---------- Gi2/0/9 Eth VLAN 200 100.1.1.1 888 DOWN Gi2/0/10 Eth VLAN 100 100.1.1.1 1000 DOWN Te3/0/1 Eth VLAN 897 100.1.1.1 10897 DOWN Gi2/0/3 Eth VLAN 100 100.1.1.1 101007 DOWN Gi2/0/8 Eth VLAN 1234 100.1.1.1 101234 ADMIN DOWN R2# *************************** This email message and any files transmitted with it are intended solely for the use of the individual or entity for whom it is addressed. It may contain confidential and privileged information. If you are not the intended recipient, please contact the sender and destroy all paper and electronic copies of this message and its contents. Any unauthorized review, use, disclosure or distribution of this email or any file attachments is strictly prohibited. _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
