It works on 15.1M - at least on the 2800s and 7200s (I've got 15.1(4)M3
in production and planning 15.1(4)M4 which just came out a couple of
days ago).
The secret combo probably relates to how you are checking out the feature:
rt1.nsw#show subscriber session username xxx@yyy
Unique Session ID: 259
Identifier: xxx@yyy
SIP subscriber access type(s): VPDN/PPP
Current SIP options: Req Fwding/Req Fwded
Session Up-time: 2w6d , Last Changed: 2w6d
Interface: Virtual-Access17
Policy information:
Authentication status: authen
Session inbound features:
Feature: QoS Policy Map
Input Policy Map: police-0.512M
Session outbound features:
Feature: QoS Policy Map
Output Policy Map: police-0.512M
Non-datapath features:
Feature: Interface-Config
Configuration sources associated with this session:
Interface: Virtual-Template10, Active Time = 2w6d
rt1.nsw#
Note: nothing shows up if you do a 'show policy-map interface
virtual-access 10', you need to use the 'show subscriber' command instead.
I did ask the TAC engineer at the time of resolving the bug if the
command syntax could be fixed as well so that it is consistent across
interface types, but apparently this needed to go through as an
'enhancement' via our AM and needed a business case before it would be
considered etc etc
Reuben
On 29/03/2012 11:26 AM, Cassidy Larson wrote:
Just resurrecting an old thread.
Anybody have any new information on "Per-user QoS policies via RADIUS" on 15.1?
I have a 1941 running 15.1(4)M1 that I'd like to accept the above, but
am unable to figure out the secret combo.
Thanks,
-c
On Mon, Mar 8, 2010 at 3:00 AM, Reuben Farrelly
<reuben-cisco-...@reub.net> wrote:
What version of IOS code are you running?
Just in case this apples to you, note that the feature "Per-user QoS
policies applied via RADIUS" is broken in all versions of IOS 15.0, and as
far as I can tell, many versions of 12.4T including 12.4(15)Tx and possibly
earlier, on multiple platforms. Apparently the code is "broken" on the 7200
and "the feature is not present" on the ISRs. I reported this bug to TAC
and tested on both 7200 and ISR (2851) platforms.
12.4M works OK on both platforms so you might want to try out 12.4(25)c on
either platform, where the code "exists" and "works".
See CSCte95297 for the gory details.
Reuben
m...@adv.gcomm.com.au wrote:
Hi,
Have DSL users terminating on LNS(7204) via Eth, with radius auth -
Trying to apply the following service policy(Configured on LNS) upon
successful auth:
policy-map JF-2MB-ADSL
class class-default
shape average 1850000
_______________________________________________
cisco-nsp mailing list cisco-nsp@puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
_______________________________________________
cisco-nsp mailing list cisco-nsp@puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/