On 28.03.2012 19:45, Saku Ytti wrote:
On (2012-03-28 09:08 -0700), Chris Hunt wrote:
interface GigabitEthernet0/1.310
encapsulation dot1Q 310
rate-limit input 11000000 2062500 4125000 conform-action transmit
exceed-action drop
rate-limit output 11000000 2062500 4125000 conform-action transmit
exceed-action drop
I would recommend rather using MQC, I don't think this is any more
officially supported.
I recall some 7 years ago on NSE100 where this command disappeared from IOS
and we migrated to MQC and got customer complaint, as it actually started
working and customers were unhappy with the new lower speed connections.
We use rate-limits like this:
rate-limit input 30720000 3840000 3840000 conform-action transmit
exceed-action drop
rate-limit output 30720000 3840000 3840000 conform-action transmit
exceed-action drop
All ok. No complaints about speed. :)
--
Sincerely yours,
Artyom Viklenko.
-------------------------------------------------------
[email protected] | http://www.aws-net.org.ua/~artem
[email protected] | JID: [email protected]
FreeBSD: The Power to Serve - http://www.freebsd.org
_______________________________________________
cisco-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
