Well Output Interpreter usually your friend, since I don't have your crashinfo file i just paste your error. This is what it says:
%ERR-1-FATAL: Fatal error interrupt Explanation: This error message indicates a Hardware problem in the device. Recommended Action: To troubleshoot try this: 1. Reload the device with no modules installed and check if the message appears. 2. Reload the device with each successive module and check to see if a certain module or mis-seated module is causing this issue. ERROR: A system crash due to the 'System Error' is normally caused by a hardware issue. TRY THIS: 1. If a new module has been recently installed, first try to re-seat the module. Re-seat all the removable components. 2. Capture the output of "show tech-support" from your device and submit it to the Output Interpreter to display potential issues and fixes. 3. If the problem persists, consider opening a service request with Cisco at TAC Service Request Tool. On 30.03.2012 19:12, Robert Johnson wrote: > I have a 3745 router with 256D, a NM-1FE-FX in slot 0, and a NM-2FE2W > in slot 1. IOS 12.4(25a). > > On Wednesday the router locked hard and was unresponsive from console, > etc. Power cycle brought it back up. This morning the router crashed, > but this time came up on its own. I'm not finding much public > information on the below "address parity error", and I'm not familiar > enough with this platform to be able to tell whether this is a > software bug, bad NM, etc. Any suggestions would be greatly > appreciated. > > Here are the interesting tidbits: > > --------------------- > router>sho ver > Cisco IOS Software, 3700 Software (C3745-ADVENTERPRISEK9-M), Version > 12.4(25a), > RELEASE SOFTWARE (fc2) > Technical Support: http://www.cisco.com/techsupport > Copyright (c) 1986-2009 by Cisco Systems, Inc. > Compiled Sat 23-May-09 00:48 by prod_rel_team > > ROM: System Bootstrap, Version 12.2(8r)T2, RELEASE SOFTWARE (fc1) > > router uptime is 1 hour, 1 minute > System returned to ROM by error - a System Error, PC 0x604EBA28 at 07:53:05 > EDT > Fri Mar 30 2012 > System restarted at 07:56:23 EDT Fri Mar 30 2012 > System image file is "flash:c3745-adventerprisek9-mz.124-25a.bin" > ----------------------- > > %ERR-1-GT64120 (PCI-1): Fatal error, Address parity error > GT=0x24000000, cause=0x00000100, mask=0x00D01D00, real_cause=0x00000100 > bus_err_high=0x00000000, bus_err_low=0x00000000, addr_decode_err=0x00000470 > cpu_err_data_high=0xFFFFFFFF, cpu_err_data_low=0xFFFFFFFF, > cpu_err_parity=0x0000 > 00FF > r0 = FFFFFFFF r1 = FFFFFFFF r2 = 0 r3 = 64A40000 r4 = 0 > r5 = 0 r6 = 0 r7 = 64CB0000 r8 = 0 r9 = 0 > r10 = 0 r11 = 646A0000 r12 = 0 r13 = 1 r14 = 0 > r15 = 64EE3C04 r16 = 0 r17 = 0 r18 = 0 r19 = 0 > r20 = 0 r21 = 8D348A4 r22 = 0 r23 = 64A38274 r24 = 0 > r25 = 646A0000 r26 = 0 r27 = 1 r28 = 0 r29 = 64EE0000 > r30 = 0 r31 = 66AA9744 r32 = FFFFFFFF r33 = FFFFFFFF r34 = FFFFFFFF > r35 = FFFFFFFF r36 = FFFFFFFF r37 = FFFFFFFF r38 = FFFFFFFF r39 = FFFFFFFF > r40 = FFFFFFFF r41 = FFFFFFFF r42 = FFFFFFFF r43 = FFFFFFFF r44 = FFFFFFFF > r45 = FFFFFFFF r46 = FFFFFFFF r47 = FFFFFFFF r48 = 0 r49 = 0 > r50 = 0 r51 = 0 r52 = 0 r53 = 663495A8 r54 = 0 > r55 = 623BD80C r56 = FFFFFFFF r57 = FFFFFFFF r58 = 0 r59 = 653CB078 > r60 = FFFFFFFF r61 = FFFFFFFF r62 = 0 r63 = 60AA5D40 > sreg = 3401FF03 mdlo_hi = FFFFFFFF mdlo = DFB3E941 > mdhi_hi = FFFFFFFF mdhi = FBCF9D47 badvaddr_hi = FFFFFFFF > badvaddr = FFFFFFFF cause = FFFFFFFF epc_hi = 0 > epc = 604EBA28 err_epc_hi = FFFFFFFF err_epc = FFFFFFFF > > %ERR-1-FATAL: Fatal error interrupt, reloading > err_stat=0x0 > _______________________________________________ > cisco-nsp mailing list [email protected] > https://puck.nether.net/mailman/listinfo/cisco-nsp > archive at http://puck.nether.net/pipermail/cisco-nsp/ _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
