Hi Team, Recently i was doing the Layer2 test in ASR9K routers, bellow is the configuration of the test.
interface TenGigE0/0/0/0 description to-me3600 l2transport-----------------------------------*access port connect to switch* interface Bundle-Ether1.1200 l2transport encapsulation dot1q 1200 exact rewrite ingress tag pop 1 symmetric !--------------------------------------------------*trunk port connect to another ASR9K* interface BVI1200 description Vlan:BDK_CNOSS_MPBN_PS [email protected] vrf MEDIA ipv4 address 10.254.14.179 255.255.255.240-------------------*same as the SVI interface on switch* l2vpn bridge group SingTelMobile bridge-domain TEST interface TenGigE0/0/0/0 ! interface Bundle-Ether1.1200 ! routed interface BVI1200 ! The topology is as bellow: Switch--------(vlan1200)-----ASR9K-----(Trunk)---------ASR9K-----(vlan1200)------switch Can anyone help to check whether the configuration is right or wrong. I use the configuration guide from Cisco.com. I don't quite understand why the access interface just have L2transport configuration, is it can assign one vlan id to the access port to ASR9K. Many thanks for your reply Thanks and Regards, Hu Xu _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
