You can't do SVI based EoMPLS with plain'ol LAN cards facing the core. You need a WAN card, like an ES, SIP, etc.
On 2012-04-05, at 4:06 PM, Chris Lane wrote: > All > > I have 2 7600s directly connected ~ interfaces are Layer3 (IP) ospf/bgp > protocols running acroos > Loopbacks configured, > version: s72033-advipservicesk9_wan-mz.122-33.SXH7.bin > > here is where i am messing up. > > i created a vlan x > put my cross connects in here. > > but the VC is down.. > > my ldp neighbor is up > > yes my vlan is UP > > interface GigabitEthernet8/1 > description > ip address x.x.x.x/30 > no ip proxy-arp > ip ospf cost 10 > logging event link-status > speed nonegotiate > mpls mtu 1546 > mpls ip > > interface Vlan3000 > > no ip address > xconnect x.x.x.x 3000 encapsulation mpls > > sh int vlan 3000 > Vlan3000 is up, line protocol is up > > sh mpls l2transport vc > > Local intf Local circuit Dest address VC ID Status > ------------- -------------------- --------------- ---------- ---------- > Vl3000 Eth VLAN 3000 x.x.x.x 3000 DOWN > Vl3001 Eth VLAN 3001 x.x.x.x 3001 DOWN > > I thought with a cross connect i could pass VLAN and L3 in the packet to > the remote side? > > Any help would be greatly appreciated.. > > sorry for a naive MPLS question > > > > > -- > //CL > _______________________________________________ > cisco-nsp mailing list [email protected] > https://puck.nether.net/mailman/listinfo/cisco-nsp > archive at http://puck.nether.net/pipermail/cisco-nsp/ _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
