Does anyone know if this and other things are slow to be or possibly will not be supported as an agenda within cisco to cause folks to upgrade to ASR9K-type platforms from older 7600 ? (please forgive if this is a silly question or a question that would be hard to answer, but I guess I'm looking to understand if any of y'all understand cisco's projected life of the 7600 in light of the new ASR9000) (I'm drawing lines between these 2 boxes since I have (2) 7600's acting as the core of my network and we just bought (12) 9k's and (10) 901's....
Aaron -----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of Justin M. Streiner Sent: Tuesday, April 10, 2012 8:03 AM To: Christian Kratzer Cc: [email protected]; Benny Amorsen Subject: Re: [c-nsp] OSPFv3 in a VRF on a 7600 On Tue, 10 Apr 2012, Christian Kratzer wrote: > On Tue, 10 Apr 2012, Benny Amorsen wrote: > >> Is it possible to run OSPFv3 in a VRF on a 7600? I cannot for the >> life of me figure it out from the documentation, and the obvious >> commands like "ipv6 router ospf 123 vrf whatever" do not work at least on SRC4. > > I have missed that feature myself for hooking up v6 vrf lite setups > over protected tunnels. Seems there is no such feature in feature navigator. VRF aware OSPFv3 is on the roadmap. There might be EFT code available for your platform if you work through your account team. Otherwise, I think that feature is supposed to be in production code toward the end of this year. jms _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/ _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
