Hi Skeeve,
That is not right, we should state the limitations of the feature in the configuration guide. I will get this edited.

Regards,
John Gill
cisco


On 4/14/12 4:24 AM, Skeeve Stevens wrote:
Thanks John,  just very frustrating is all... the release notes said a
particular version supported it, and when we did it, it didn't.  I was
hoping it was coming, now I have to look at options of changing the
hardware.

Thanks again.


*Skeeve Stevens, CEO*
eintellego Pty Ltd
[email protected] <mailto:[email protected]> ;
www.eintellego.net <http://www.eintellego.net>

Phone: 1300 753 383 ; Fax: (+612) 8572 9954

Cell +61 (0)414 753 383 ; skype://skeeve

facebook.com/eintellego <http://facebook.com/eintellego>

twitter.com/networkceoau <http://twitter.com/networkceoau> ;
www.linkedin.com/in/skeeve <http://www.linkedin.com/in/skeeve>

PO Box 7726, Baulkham Hills, NSW 1755 Australia


The Experts Who The Experts Call
Juniper - Cisco – Brocade - IBM



On Sat, Apr 14, 2012 at 11:22, John Gill <[email protected]
<mailto:[email protected]>> wrote:

    Hi Skeeve,
    For the 5010/5020 you will see the following error when you enable
    the feature:

    (config)# feature flexlink
    2012 Apr 14 01:16:32 esc-n5020-1
    %FLEXLINK-2-FLEXLINK_FEATURE___ENABLE_FAILED_PLATFORM: Enablement of
    feature Flexlink failed. Flexlink is not supported on
    Nexus5010/Nexus5020 platforms.
    Error: while enabling/disabling service: Flexlink, err: Failure to
    enable feature Flexlink - platform not supported (0x42880039)

    It is unlikely future support will be added to the 1st-gen platform.

    Apologies,
    John Gill
    cisco


    On 4/13/12 7:49 PM, Skeeve Stevens wrote:

        Hey all,

        Does anyone know when/if the Nexus 5010 will support Flex Links?

        We upgraded to 5.0(2)N1(1) thinking it would, but it didn't work.

        Thoughts?

        *Skeeve Stevens, CEO*
        eintellego Pty Ltd
        [email protected] <mailto:[email protected]> ;
        www.eintellego.net
        <http://www.eintellego.net><http://www.__eintellego.net.au
        <http://www.eintellego.net.au>>

        Phone: 1300 753 383 ; Fax: (+612) 8572 9954

        Cell +61 (0)414 753 383 ; skype://skeeve

        facebook.com/eintellego <http://facebook.com/eintellego>

        twitter.com/networkceoau <http://twitter.com/networkceoau> ;
        www.linkedin.com/in/skeeve <http://www.linkedin.com/in/skeeve>

        PO Box 7726, Baulkham Hills, NSW 1755 Australia

        The Experts Who The Experts Call
        Juniper - Cisco – Brocade - IBM
        _________________________________________________
        cisco-nsp mailing list [email protected]
        <mailto:[email protected]>
        https://puck.nether.net/__mailman/listinfo/cisco-nsp
        <https://puck.nether.net/mailman/listinfo/cisco-nsp>
        archive at http://puck.nether.net/__pipermail/cisco-nsp/
        <http://puck.nether.net/pipermail/cisco-nsp/>


_______________________________________________
cisco-nsp mailing list  [email protected]
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/

Reply via email to