Hi > -----Original Message----- > From: [email protected] [mailto:cisco-nsp- > [email protected]] On Behalf Of Marco Marzetti > Sent: lunedì 16 aprile 2012 16:13 > To: [email protected] > Subject: [c-nsp] MQC and PA-A6 > > Hello, > > Simple and plain question: does MQC work in hardware when attached to > ATM VP||PVC on c7200+PA-A6 ? >
Simple answer No Longer answer , it does have a "SAR" that does ATM shaping ( i.e vbr abr etc) in hardware , but all the ip stuff will be done on the router cpu. Ciao Brian > Thank You > > Regards > _______________________________________________ > cisco-nsp mailing list [email protected] > https://puck.nether.net/mailman/listinfo/cisco-nsp > archive at http://puck.nether.net/pipermail/cisco-nsp/ --- This e-mail is intended only for the addressee named above. As this e-mail may contain confidential or privileged information, if you are not the named addressee, you are not authorized to retain, read, copy or disseminate this message or any part of it. Please consider your environmental responsibility before printing this e-mail. _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
