Hi,
You need to configure the following command in order to propagate the
default route to the remote PEs:
router bgp <ASN>
!
address-family ipv4 vrf <vrf-name>
* default-information originate*
Regards.
On 17/04/2012 19:06, [email protected] wrote:
I'm not able to send the default route across a mpls L3VPN
On a ce router I'm doing defaul info-orig and a directly connected PE rcvs it
in it's vrf specific rib
So, again, i see the default route learned via ospf on ce-pe advertisements in
the pe vrf on one side of the cloud....then i redis ospf into mp-ibgp and i see
all of my ospf routes (about 490 routes total) advertised over the mpls core to
the other pe on the other side of the cloud .... the only route that doesn't
make it over is 0/0
Any ideas?
Aaron
_______________________________________________
cisco-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
_______________________________________________
cisco-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
