On Apr 25, 2012, at 3:55 PM, Randy wrote: > I am not clear if you have 802.1s OR 802-1w enabled on the Brocade(care to > post the stp output from Brocade?)
sh run | i mstp mstp name acedc mstp revision 1 mstp instance 0 vlan 1 to 4090 mstp start tel...@ar04.prov#show mstp detail MSTP Instance 0 (CIST) - VLAN Scope: 1 to 4090 ---------------------------------------------------------------------------- Bridge: 80000024389c3d00 [Priority 32768, SysId 0, Mac 0024389c3d00] FwdDelay 15, HelloTime 2, MaxHops 20, TxHoldCount 6 Port 2/1 - Role: DESIGNATED - State: FORWARDING PathCost 2000, Priority 128, OperEdge T, OperPt2PtMac F, Boundary N/A Designated - Root 80000024389c3d00, RegionalRoot 80000024389c3d00, Bridge 80000024389c3d00, ExtCost 0, IntCost 0 ActiveTimers - helloWhen 2 MachineState - PRX-DISCARD, PTX-IDLE, PPM-SENDING_RSTP, PIM-CURRENT PRT-ACTIVE_PORT, PST-FORWARDING, TCM-INACTIVE BPDUs - Rcvd MST 0, RST 0, Config 0, TCN 0 Sent MST 11, RST 0, Config 0, TCN 0 tel...@ar04.prov#sh spanning-tree tel...@ar04.prov#show rstp tel...@ar04.prov# That helpful? Thanks! _______________________________________________ cisco-nsp mailing list cisco-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/