On Wed, Apr 25, 2012 at 22:03, henrry huaman <[email protected]> wrote:
> Hi guys,
> Please could help us, we need to send defaul route in IPv6 (IOS-XR).
Hi Henry,
I am guessing that you want to send a default route to a BGP peer. In
this case, your syntax below will not work out. You are instead
looking for "default-originate" under the address family under the
particular neighbor.
router bgp 65404
neighbor 2001:db8::1
address-family ipv6 unicast
default-originate
> And we have only this command in bgp proccess "default-information originate".
This is used to import a default-route into the BGP process with the
redistribute command. Typically when you redistribute from another
protocol 0.0.0.0/0 and ::/0 are ignored. This changes that default
behavior.
HTH,
Andy
_______________________________________________
cisco-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
