On Thu, 2012-05-17 at 22:42 -0400, Andy Dills wrote: > On Thu, 17 May 2012, Peter Rathlev wrote: > > No problem. Take a look at "Configuring Dynamic NAT or Dynamic PAT": ... > Yeah, I had looked at that, and it's not quite what I'm trying to > accomplish. > > What I want is to take a single public IP and NAT it to two seperate > private IPs, based on source address of the incoming request.
Ah, so 10.0.0.100 and 10.0.0.200 are two different servers, and you want requests from "outside" to hit one or the other based on the source address of the remote clients, right? AFAIK that's not possible, at least not using 8.2 and earlier. You can translate the same inside address to two different outside addresses depending on destination, but that doesn't help much. If the services were using two different ports you could also direct requests to two different servers, though you could still not translate based on source address. Maybe 8.3 and later can do it. I haven't looked at those yet but the NAT translations have changed syntax and might now be more flexible. Linux with iptables could do it of course. :-) -- Peter _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
