I've got an upcoming deployment of an ASR 1006 on the horizon and was looking for some feedback in regards to code versions. I've yet to deploy any ASR's other than the 1001's. On the 6 or so I've deployed in enterprise environments, they've been versions 3.4 and 3.5, specifically "asr1001-universalk9.03.05.01.S.152-1.S1.bin" in one scenario. This particular guy is a fully redundant 1006 with advanced ip services, in a S/P environment and I was looking for some recommendations, as far as code and any other glaring things. The box will sit on the public side, but at this point will probably only receive a default route. It will also have somewhere in the neighborhood of 12-16 IPSec tunnels and be used solely for the tunnels. Overall I've had good luck with the ASR platform, but this is larger scale and wanted to pose the question.
Thanks in advance, Nick Griffin _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
