translate the vlan numbers to another ?
> Message: 6 > Date: Sun, 17 Jun 2012 03:08:15 -0500 > From: Erik Sundberg <[email protected]> > To: Jason Lixfeld <[email protected]> > Cc: "[email protected]" <[email protected]> > Subject: Re: [c-nsp] 6500 L2 Switch Traffic locally between two > SubInterfaces on different ports? > Message-ID: > <[email protected]> > Content-Type: text/plain; charset="us-ascii" > > I was looking in to the connect command after posting. Unfortunately the only > supported interfaces types are showing up on the switch is Dialer and MFR on > the 6500 > > > So the reason that i am not setting this up as a vlan is the following. > > We have multiple GE circuits to different carriers that are setup as "L2 > NNIs". The carriers deliver circuits (T1s to MetroE) to our customers put the > traffic for each customer on a VLAN on the GE. Depending on the customers' > needs they get Internet Access, L3VPN MPLS, or EoMPLS L2 P-P Service. With > the multiple carriers going into this same chassis we have a lot of > overlapping VLAN id's. (Config example at end of email) > > So the need for a L2 connection between two carriers are on the same switch > has come up and that is why i need to create the Local L2 switching between > the two subinterfaces. > > Here is what i am looking for in the XR Software but i am looking to be able > to do the same thing on the Cat6500, but it doesn't support L2VPNv3 > l2vpn > xconnect group examples > p2p example1 > interface TenGigE0/7/0/6.5 > interface GigabitEthernet0/4/0/30 _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
